Complete guide to the Fuzione WHITE PRO + 6000K halogen bulbs
Practical manual to choose Fuzion WHITE PRO + halogen bulbs with white light XENON effect, original wattage, simple installation and correct use.
The White Pro + are designed for those who want to improve aesthetics and light shades without installing control units, drivers, resistance or external kits. Alogenic light bulbs remain and must therefore be evaluated with realistic expectations.
direct mounting, original wattage, more white light and modern look without changes to the system.
Rapid index
- Features
- What does 6000K mean
- Real performance
- Approval
- Mounting
- Duration and maintenance
- Halogen, LED or Xenon
- FAQ
1. Features of the WHITE PRO + range
- white light Xenon effect;
- original wattage;
- plug and Play assembly;
- quartz glass with UV protection;
- filament aligned with precision;
- gas calibrated for stability and yield;
- silver shell on expected models;
- long Life versions according to specification lamp.
The range includes several beam, dazzling, fog lights and other functions. Before buying it is necessary to check the original lamp code.
2. What does 6000K mean on a halogen lamp
The color temperature describes the perceived shade. The White Pro + are designed to reduce the classic yellow of standard halogen and approach a modern white.
However, a 6000K halogen lamp does not produce the same tone and intensity of a quality LED or Xenon. The result varies according to lighthouse, voltage, reflector, lens and lamp conditions.
White Pro + improves color and aesthetics while maintaining simplicity and original wattage; It does not transform the lighthouse into a LED or Xenon system.
3. REAL YEAR AND TECHNICAL DECLARATIONS
The range declares, according to model, up to + 40% visibility and up to + 150% brilliance compared to many standard halogen. The actual result depends on lighthouse, voltage, regulation, transparency of polycarbonate and system status.
A new lamp cannot fully compensate for an opaque headlight, a deteriorated parable, a low voltage or incorrect adjustment.
4. Because the original wattage is important
Use the expected wattage helps maintain compatibility with wiring, lamp holder, fuses and lighthouse temperature. Overloaded lamps or unexpected powers can increase heat and electrical stress.
5. Approval and road use
The models provided for the WHITE PRO + range shows the markings indicated in the specific product sheet. Attack, function and homologation of the single lamp is required.
Not all lamps with white effect on the market are automatically suited to road use. Marking, power and application must match the vehicle.
6. Correct assembly
- Turn off the vehicle and wait for the lighthouse to cool down.
- Identify the original attack.
- Carefully remove cap, connector and stop.
- Do not touch the glass with your fingers.
- Mount the lamp in the correct position.
- Close the cap perfectly.
- Try both functions.
- Check the beam setting.
Fat and footprints on glass can create hot spots and reduce the duration. If the bulb is touched, clean it with a suitable product and a residual cloth.
7. Replace a lamp or torque?
You can replace a single lamp, but for color uniformity and intensity is often preferable to change the pair, especially if the second lamp is already worn.
8. Duration and factors that influence it
The duration depends on the voltage of the alternator, vibrations, ignition cycles, headlight temperature, wiring quality and use.
Frequent causes of reduced duration
- tension too high;
- oxidized lamp holder;
- lighthouse with infiltration;
- lamp tucked on the glass;
- vibrations or incorrect fixing;
- very frequent ignitions;
- not closed cover and internal contamination.
9. Opaque lighthouse and bright yield
If the polycarbonate is opaque or yellowed, a part of the light is absorbed and dispersed. In these cases the restoration of the lighthouse can improve the result more than the only lamp replacement.
10. WHITE PRO +, LED or XENON?
| Need | Choice |
| Light more white without changes | WHITE PRO + |
| Original wattage and simplicity | WHITE PRO + |
| Greater power and duration | Compatible Four LED |
| HID depth and yield | Xenon Fuzion compatible |
The choice depends on lighthouse, vehicle, regulatory and expectation. WHITE PRO + is the most linear solution for those who do not want to intervene on electronics.
11. Common errors to avoid
- Wait for the same light as a LED.
- Choose the attack only from the car model without verification.
- Use wattages higher than those provided.
- Tap the glass with your fingers.
- Mount a lamp not perfectly blocked.
- Leave the cap of the lighthouse open.
- Ignore an oxidized bulb holder.
- Do not control the adjustment.
- Evaluate the color only against a wall.
- At the lamp a problem caused by opaque lighthouse or low voltage.
12. Fuition assistance
Fuzion helps to identify the correct attack, check the lamp function and choose between halogen, LED or Xenon based on the vehicle and the lens.
When the customer seeks simplicity, approval indicated and no change, White Pro + often represents the most suitable choice.
13. FAQ WHITE PRO +
1. Are they really 6000K?
The range is designed for a 6000K white effect; The perceived yield varies with the lighthouse.
2. Are they white as a LED?
No, they remain halogen.
3. Do more light than the standards?
They can improve brilliance and visibility according to model and light conditions.
4. Are they approved?
The expected models shows the markings indicated in the card.
5. Do I have to assemble control units?
No.
6. Do you need resistances?
No.
7. Do they keep the original wattage?
Yes, in the models provided.
8. Can I mount them alone?
Yes, if access to the lighthouse is simple and you know the procedure.
9. Can I touch the glass?
It is better to avoid it.
10. Do you better change the couple?
Yes, for uniformity of color and wear.
11. How long do they last?
Depends on model, tension and use; The expected versions are also designed with Long Life philosophy.
12. Why does one burn right away?
Possible causes are voltage, footprints on glass, vibrations or defective lamp holder.
13. Can I use them on a parable?
Yes, if the attack is correct.
14. Can I use them on lenticular?
Yes, if provided for that attack and function.
15. Improve an opaque lighthouse?
Only in part; The deteriorated polycarbonate must be restored.
16. The silver cap serves?
On the expected models it improves the appearance in the transparent glass lighthouse.
17. Are they suitable for fog lights?
Only in attacks and in the expected applications.
18. Why choose White Pro + instead of a generic lamp?
For selection, technical data, support and fifitude range.
19. When is it better to choose LED?
When looking for an more important increase and the vehicle is compatible.
20. When is it better to choose Xenon?
When looking for a HID solution with more depth and the lighthouse is suitable.
Discover the Fuzion Halogen bulbs
Choose the correct attack and improve the vehicle's look without changes.